Residential glass repair and installation in Peachtree Corners, GA
Peachtree Corners grew up around Technology Park, and the housing grew with it. The subdivisions off Spalding Drive, Peachtree Corners Circle and Holcomb Bridge Road are largely 1970s and 1980s traditionals: brick and cedar, wide rear elevations facing the trees, aluminum sliding doors onto a deck. Those houses are now well past the service life of their original insulated glass, and fogged units are the single most common thing we replace here. The townhomes going up around the Town Center and The Forum are a different job, mostly tempered rail and shower work.
Glass Inc has cut glass in metro Atlanta since 1956. Home glass work in Peachtree Corners covers insulated unit replacement, whole windows, patio and French doors, deck and stair railings, mirrors and shower enclosures. Nearby: Duluth and Johns Creek. For a vehicle instead, see windshield repair and replacement in Peachtree Corners. Call (404) 873-6991 for a free estimate.
Starting prices in Metro Atlanta
- Window Glass Replacement
- $149 starting at
- Custom Shower Doors
- $599 starting at
- Custom Mirrors
- $99 starting at
Starting prices for the most common jobs. Final cost depends on glass type, opening size, and hardware. Call for an exact quote before any work begins.
The glass in a 1980s Gwinnett house, forty years on
Insulated glass has a service life. The units put into Peachtree Corners houses when the subdivisions went in have mostly reached the end of it, and the failure shows up the same way every time: a milky film between the panes that no cleaner touches, worst on the elevation that takes the afternoon sun.
The good news is that the sash and the frame in those houses are usually fine. We replace the unit and leave the window. The bad news is that a lot of them were glazed with sizes that no longer come off a shelf, which is why we template each opening and cut in our own shop rather than ordering standard stock and shimming the difference.
The newer end of town, around the Town Center and along Peachtree Parkway, is mostly tempered work: rail infill, shower panels and oversized fixed lites.
Replacing failed 1980s insulated units
This is the bread and butter of our Peachtree Corners work. We measure the sightline of the failed unit, build a matching double-pane with a low-E coating and set it back into the existing sash. It costs a fraction of a whole-window replacement and there is no disturbance to trim, siding or paint. On the rear elevations that face west across the Chattahoochee side of the county, the coating change is noticeable in the room within a day.
Patio doors, sunrooms and deck rails
Aluminum sliding doors onto a deck are standard in these subdivisions and the glass fails long before the track does. A tempered replacement panel goes back into the original door for far less than a new unit. Sunroom and enclosed-porch glass is the same principle. Deck and stair rail infill has to be tempered or laminated under the code, and where a rail is being reglazed we set it to the current standard rather than matching whatever was there in 1985.
Shower glass in an older Gwinnett bathroom
Master baths in these houses were built with a garden tub and a small framed shower, and the usual remodel opens that up into a walk-in with a fixed panel or a door on a curb. Because the walls are forty years old and rarely plumb, we laser the opening before anything is cut. Framed, semi-frameless and 1/2 inch frameless are all available, in clear, low-iron, frosted, fluted or rain glass, with hardware finished to match what the plumber is leaving behind.
HOA drawings, in-house crews
Peachtree Corners is a city of governed subdivisions, and most architectural committees want to see the product before it goes in. We produce the elevation drawing, the materials list and the manufacturer data sheet you need for that review. The installers are Glass Inc employees under our own insurance, not subcontractors, and the glass is cut at our shop on Glen Iris Drive. Visits run Monday to Friday, 8am to 5pm, with a time window rather than an open-ended wait.
How many visits a job takes
Stock sizes are one visit. Anything templated is two: we measure, the shop cuts, we come back and set. A single insulated unit is thirty to sixty minutes in the frame. A patio door panel is about an hour. A frameless shower enclosure is two to four hours on install day, with the fabrication happening in between because tempered glass cannot be trimmed on site.
How to tell what has actually failed
Cloudiness sealed between the panes means the edge seal is gone and the insulated unit needs replacing. Water on the inside face of the glass on a cold morning is room humidity, not a glass fault, and no replacement will stop it. A slight ripple with no moisture is usually just older float glass doing what it has always done. We name which one you have during the estimate, and only the first carries a cost.
Architectural review and insurance claims
For the subdivisions off Spalding Drive, Jones Bridge Road and Peachtree Parkway we supply what an architectural committee asks for: the drawing, the finish, the product data. On an insurance claim after a storm or a break-in we photograph before anything is cleaned up, break the estimate down per opening and hand the adjuster the glass specification rather than a single figure, which is the part that normally keeps a glass claim from stalling.
Coverage around Peachtree Corners
All of Peachtree Corners plus the Gwinnett and north Fulton addresses next to it: Norcross, Duluth, Berkeley Lake, Johns Creek, Dunwoody and Alpharetta. That covers Technology Park, Peachtree Corners Circle, Holcomb Bridge Road, Spalding Drive, the Town Center blocks and the streets running down toward Jones Bridge Park. The city is inside our service radius from Glen Iris Drive with no travel surcharge.
Cut to size or off the shelf
Most of the older stock here is not a catalogue size, so cut to size is the honest answer for it, along with every shower and every rail infill. Where a window happens to be a current standard dimension and square, we will quote you the stock unit instead, because there is nothing to gain from paying a custom price for a common pane. What the cut buys is an even bearing on all four setting blocks, and that is what keeps the next seal alive longer than the last one.
Residential Glass FAQs
How much does home window glass replacement cost in Peachtree Corners?
Standard single or double-pane glass runs $150 to $400 per window depending on size, glass type and access. A replacement insulated double-pane unit is $200 to $500+ by dimension. Oversized fixed lites, arch tops and premium glass such as low-E, laminated or tempered price higher. Because so much of the local stock is an obsolete size, most quotes here are for cut-to-size glass. The in-home estimate is free.
How long should an insulated glass unit last?
Manufacturers generally expect somewhere between fifteen and twenty-five years from a sealed unit, and Georgia heat cycling is at the harsh end of that. The units in Peachtree Corners houses built in the late 1970s and 1980s are well past it, which is why fogged glass is the most common call we take in this city. Replacing the unit rather than the window keeps the cost and the disruption down.
Why can I not clean the haze off my window?
Because it is on the inside faces of a sealed unit. When the edge seal fails, humid air enters the cavity and leaves a deposit that no cleaner can reach. The sash, frame and hardware are usually unaffected. The fix is a new insulated unit in the existing sash, and it is the least expensive way back to a clear pane.
How much do custom shower doors cost in Peachtree Corners?
Custom shower doors start at $599 installed, which is about where a framed enclosure sits. Semi-frameless typically runs $600 to $1,000. Frameless generally falls between $800 and $3,000 installed here, set by glass thickness (3/8 inch or 1/2 inch), hardware finish and whether it is a single door, a door with a return panel or a corner enclosure. Measurement in the home costs nothing.
Can you replace just the glass in a sliding patio door?
Yes, and it is usually what we recommend in these subdivisions. The tempered panel is replaceable on its own, so a fogged or cracked slider does not mean a new door. We take the panel out, fit new tempered glass and rehang it on the original track. If the rollers are also gone we will tell you at the estimate, because that is a separate part and a separate cost.
Which glass in my house has to be tempered?
Doors and the lites beside them, shower and tub enclosures, railing infill and glass close to a floor or walking surface all need safety glazing under the Georgia code. Tempered glass is heat-treated off site and cannot be cut, drilled or notched after the fact, so every dimension, hole and cutout is confirmed with you before we place the order.
Will homeowners insurance cover broken glass?
For a covered peril it usually does, less your deductible. Storms, falling limbs, vandalism and break-ins normally qualify. Seal failure and age-related deterioration do not, because insurers class those as maintenance, which matters here given how much of the local glass is failing on age alone. We document and itemize either way so you can weigh the repair against your deductible.
Get a free Peachtree Corners home glass estimate
Fogged units, patio door panels, rail infill and shower glass, measured on site and cut in our own shop. Free estimate and a lifetime warranty on our workmanship.